Skip to main content

You are here

Hydraulic Transport Valves

The HYDRECO range of valves includes some of which are for specific applications while others can be used for a wide variety of applications. A range of control options is available, from manual, to pilot hydraulic, to pneumatic control, to electro hydraulic control. Depending on model, features include: Sectional or monoblock construction, flow rating to 450 litres/min, multiple spool options, manual / hydraulic / electro-hydraulic / pneumatic control options, tandem circuit, multiple inlets.

Product Specification Weight

Diverter VA 86 Series

  • HARD CHROME SPOOLS
    For longer life.
  • LARGE PORTS AND SPOOL PASSAGES
    For maximum flow with minimum pressure drop across the valve.
  • SIMPLE DESIGN
    For trouble free operation and installation.

The 86 Series valve is used to direct oil flow to two different hydraulic applications. This valve is used extensively in truck and trailer applications for tipping both the front and rear hoists. It can also be used for two circuits that do not need to be running concurrently. Use this value in conjunction with a dual control (e.g. CK113 or CK114) for the operation of truck and trailer hoists.

Up to 190 l/min

0lb

Hoist Directional Control VA83 Series

  • HARD CHROME SPOOLS
    For longer duty and life.
  • SUPERFINE SPOOL AND HOUSING TOLERANCES
    Providing minimum loss of pressure through the valve
  • DAMPENED VALVE
    Allows slow lowering of the hoist"

The 83 Series valve is a bracket mounted, pressure balanced single spool valve, for the control of hoist operated tipping applications. When used in conjunction with a proportional air control (e.g. CK90A or C) the valve controls the rate of lowering when the dampened version is ordered. Having an inbuilt check and pressure relief valve, this tipper valve has become the industry standard for quality and performance.

Up to 150 l/min

0lb

Manual diverter valve D3V Series

  • HIGH PRESSURE CAPACITY (HP DESIGNATOR)
    Suitable for tipper, winch, cranes (up to 350 bar)
  • COMPACT DESIGN
    Minimum space required for installation
  • EASY TO INSTALL
    Low installation cost
  • SIMPLE DESIGN
    Low maintenance

The D3V series regular and high pressure diverter valves for flows up to 180 l/min and pressures up to 350 bar are rugged lever operated valves that can be used to operate either of two hydraulic circuits.

Up to 180 l/min

0lb

Two Spool Valve 73200D

  • COMPACT SIZE
    For minimum problems in fitting and mounting.
  • MONOBLOCK CONSTRUCTION
    For maximum integrity
  • AIR OPERATED
    For ease of engagement

The 73200D series two spool valve is ideally suited to truck and trailer combinations with flow requirements of up to 120 l/min. Each spool controls the operation of one of the hoists and the airshift cylinders require the use of control kit CK108, CK158 or CK159 from inside the cab.

Up to 120 l/min

Two Spool Valves VA204 Series

  • COMPACT SIZE
    For minimum problems in fitting and mounting.
  • MONOBLOCK CONSTRUCTION
    For maximum integrity
  • AIR OPERATED
    For ease of engagement
  • HIGH FLOW RATES
    For use with systems requiring up to 140 l/min

The 204 valve has been designed in response to the changing needs of the modern truck market. These valves provide another option for truck and trailer applications where dual tipping or compact size is required, in conjunction with high flow rates (up to 140 l/mim). When used with a dual hoist control (CK108) these valves provide a compact solution to a common application.

Up to 140 l/min

0lb

Tank Valves

  • Electric Tipping Valve with Open Centre
  • Adjustable relief valve
  • Built-in check
  • 12 or 24 Voltage
  • Chassis mounted 15ltr Steel Tank with filler breather

Tank mounted tipper control valve

Flow 110 liters / minute

Pressure 170 bar

0lb

Tank mounted tipper control valve

Flow 180 liters / minute

Pressure 200 bar

0lb

1 inch Diverter Valve

Flow 140 liters / minute

Pressure 190 bar

0lb