Skip to main content

Power Units

  • Power units are S3 duty for intermittent use of 10% of 10 minutes (1 minute on and 9 minutes off).
  • Clean all hydraulic parts before mounting the power unit.
  • Oil viscosity should be 32 to 68 cst @ 40ºc.
  • Change oil after 100 hours of use, then every 3000 hours.
  • The power unit is to be mounted horizontally.
Downloads
Product Specification Weight

Single Acting Power Unit

Available with12v or 24v motor, this power unit has a check valve, an adjustable relief valve, adjustable lowering speed, emergency lowering valve and the choice of 5, 7 or 16 litre tank.

12V / 24V
1.5 / 2.2kW
5/7/16 l tank
160 bar
2.1 cc/r

0lb

Double Acting Power Unit

The double acting power unit is available in 12v or 24v configuration and has two adjustable relief valves (one main and one low pressure on port 'A'). It is available with a check valve, 5, 7 or 16 litre tanks and comes complete with a sealed pendant control.

12V / 24V
1.5 / 2.2kW
5/7/16 l tank
160 bar
2.1 cc/r

0lb