Skip to main content

Eaton Transmissions

You are here

Eaton 6109, 6209,8209, 8309 - PA406 Series Heavy Duty 6 Bolt Deep Reach Airshift
Specification:

Power Take Off PA406

  • 0.72:1 REDUCTION RATIO FOR DIRECT DRIVE
    For very high torque at the output
  • 1.00:1 RATIO FOR OVER DRIVE
    For extra high torque at the output
  • CONSTANT MESH
    With heavy duty bearings for longer life
  • WIDE VARIETY OF OUTPUTS
    To suit many vehicle configurations

The PA406 Series PTO has been developed for the left, front opening on the Eaton FS series of 9 speed synchromesh transmissions. Available with air operation this PTO provides a high torque output solution for applications needing high flow and high pressure.

Intermittent duty 440Nm
Power take off for Eaton 6109, 6209, 8209, 8309 transmissions

Weight:
0lb
Eaton FS/0 6109, 6209, 6309, 8209, 8309 and Eaton FS/FS0 4106 and 5206 PA78 SAE 6-BOLT PTO
Specification:

78 SERIES SAE 6-BOLT PTO

Designed for transmissions with SAE 6 bolt openings, the 78 series PTO has a good output ratio for most application. Suitable for the reverse idler PTO opening on the Eaton FS 6109, 6209, 6309, 8209 and 8309 transmissions, this PTO is suitable for direct drive and overdrive versions. With ratios of 0.975:1 and 1.30 x engine speed depending on whether fi tted to a direct or overdrive transmission.

SUITS:
Eaton FS/0 6109, 6209, 6309, 8209, 8309 Eaton FS/FS0 4106 and 5206

Weight:
0lb
PB151 rear of countershaft power take-off
Specification:

REAR MOUNTED POWER TAKE-OFF PB151

Suits: Volvo, Iveco, Eaton and ZF transmissions.

BETWEEN 0.6 AND 1.2:1 OUTPUT

Dependant on transmission, providing better speeds for hydraulic pumps.

SUITABLE FOR REAR OF COUNTER SHAFT OPENINGS

Refer to your local PTO contact for configurations and specifications on outputs.

ACCEPT A WIDE VARIETY OF PUMPS

Maximum flexibility for fitment.

DIN STANDARD OUTPUT

Fits many standard pumps especially piston pumps for high pressure applications. Note: can be adapted for Powauto pump mount.

Weight:
0lb