Skip to main content
Product Specification Weight

Power Take Off PA413

  • 0.69 - 0.93 REDUCTION RATIO (depending on transmission)
    For very high torque at the output shaft
  • CONSTANT MESH
    With heavy duty bearings for longer life
  • WIDE VARIETY OF OUTPUTS
    To suit many vehicle configurations

The PA413 Series PTO is a compact side mount heavy duty PTO suitable for the LJ06S transmission. Available in airshift, this PTO has sufficient torque (431Nm) for all applications, with output speeds around 75% of engine speed (depending on transmission model).

Intermittent duty 431Nm
Power take off for Hino LJ06S transmissions

Enquire Now

Power Take Off PA412MK

  • 0.653 & 0.821 REDUCTION RATIO (depending on transmission)
    For very high torque at the output shaft
  • CONSTANT MESH
    With heavy duty bearings for longer life
  • WIDE VARIETY OF OUTPUTS
    To suit many vehicle configurations

The PA412MK Series heavy duty PTO is suitable for the LX06S range of Hino transmissions and replaces the PA402 series that has been operational for a number of years. The PA412 has a lower profile than the PA402, making it easier to install around chassis obstructions. The output torque and speed remains unchanged.

Intermittent duty 355Nm
Power take off for Hino LX06X transmissions

Enquire Now

Power Take Off PA393

  • DEEP REACH
    Meshes with many Asian manufactured transmission
  • HEAVY DUTY TAPER ROLLER BEARINGS
    Long life and increased support for the idler gear
    WIDE VARIETY OF GEARS
  • Suitable for many transmissions
    (Toyota, Mazda, Ford, Isuzu, Daihatsu, Hino)
  • HELICAL GEARS
    Quieter operation
  • CONSTANT MESH GEARS
    Less potential for gearbox damage if operated incorrectly

The PA393 Series PTO is a medium duty, deep reach PTO designed for many Asian manufactured transmissions. The deep reach six bolt flange fits many standard transmissions allowing for a compact fit on these gearboxes. This PTO is available with a variety of outputs for most pump application and is suitable for air or cable operation.

Intermittent duty 177 to 320Nm
Power take off for Hino M155/H260/H350 transmissions

0lb Enquire Now

Power Take Off PA847

  • 0.60 & 0.74:1 OUTPUT RATIO (depending on transmission)
    Provides high torque for pumping applications
  • SINGLE GEAR
    For simple and smooth operation
  • WIDE VARIETY OF OUTPUTS
    For configuring with many pumps
  • TAPERED ROLLER BEARINGS
    High capacity for output shaft
  • 847 SERIES

The PA847 Series PTO is a heavy duty reverse idler driven PTO suitable for many Asian transmissions. Available for Hino and Nissan trucks it is available in air operation only. Having a heavy duty output torque (340Nm) and slower speed (70%) it is ideally suited to drive many hydraulic applications, especially Japanese style dump pumps and close coupled Powauto pumps.

Intermittent duty 336 to 430Nm
Power take off for Hino/Nissan transmissions

 

0lb Enquire Now

• 0.967:1 OUTPUT RATIO
Provides high torque for pumping applications
• SINGLE GEAR
For simple and smooth operation
• VITON SEALS
For high temperature conditions
• TAPERED ROLLER BEARINGS
For lower gear stresses

0lb Enquire Now
Enquire Now