Isuzu Transmissions
Isuzu MJX21P AMT - PA859 Series Heavy Duty Single Gear Airshift
Specification:
Power Take Off PA859
- 0.975:1 OUTPUT RATIO
Provides high torque for pumping applications - SINGLE GEAR
For simple and smooth operation - WIDE VARIETY OF OUTPUTS
For configuring with many pumps - Tapered roller bearings
High capacity for gear thrust loads
The PA859 series PTO is a single gear heavy duty PTO designed for the MJX12P manual and AMT transmissions. Having an output torque of 490Nm and speed of 0.975 x engine speed, this PTO will suit most applications. This PTO is only available in airshift operation and has been designed for close coupling a hydraulic pump or having a mechanical output shaft with a companion flange.
Intermittent duty 490Nm
Power take off for Isuzu MJX21P AMT transmissions
Weight:
0lb
Isuzu MLD - PA371 Series Medium Duty Deep Reach 8 Bolt Airshift
Specification:
Power Take Off PA371
- BETWEEN 0.72 AND 1.02:1 RATIO
Depending on transmissions, for high flow pump requirements. - MULTIPLE OPERATING OPTIONS (AIR, CABLE)
For greater flexibility in operation. - HIGH CAPACITY IDLER BEARINGS
For longer life. - VERSATILE DESIGN
For ease of installation. - VARIETY OF OUTPUTS
The PA371 Series PTO is an airshift PTO suitable for the side opening on the Isuzu MLD series of transmissions. This medium duty (363Nm) airshift PTO is suitable for most applications and can be supplied with a variety of output types for different applications.
Intermittent duty 363Nm
Power take off for Isuzu MLD transmissions
Weight:
0lb
Isuzu MLD - PA381 Series Heavy Duty Deep Reach 8 Bolt Airshift
Specification:
Power Take Off PA381
- BETWEEN 0.58 AND 0.82:1 RATIO
To allow maximum torque for pump operation - AIR SHIFT OPERATED
For ease of engagement - A RANGE OF OUTPUTS
To allow close coupling or remote mounting of the pump - TAPERED ROLLER BEARINGS
Higher torque capacity
The PA381 Series PTO is a heavy duty (415Nm) PTO ideally suited to applications requiring high loads at lower speeds. Suitable for the Isuzu MLD series of transmissions this PTO is available with either hydraulic or mechanical outputs.
Intermittent duty 415Nm
Power take off for Isuzu MLD transmissions
Weight:
Isuzu MSA/MXA - PA393 Series Medium Duty Deep Reach 6 Bolt Air/Cableshift
Specification:
Power Take Off PA393SB
- DEEP REACH
Meshes with many Asian manufactured transmission - HEAVY DUTY TAPER ROLLER BEARINGS
Long life and increased support for the idler gear - WIDE VARIETY OF GEARS
Suitable for many transmissions
(Toyota, Mazda, Ford, Isuzu, Daihatsu, Hino) - HELICAL GEARS
Quieter operation - CONSTANT MESH GEARS
Less potential for gearbox damage if operated incorrectly
The PA393SB Series PTO has been designed to suit Isuzu MSA and MXA transmissions, and is available with either air or cable operation. This regular duty PTO (330Nm) is ideally suited to applications requiring small flows such as cranes and underbody hoists and is capable of handling all applications that this size vehicle will usually encounter.
Intermittent duty 177 to 320Nm
Power take off for Isuzu MSA/MXA transmissions
Weight:
0lb
Isuzu MYY - PA401 Series Medium Duty 6 Bolt Deep ReachPTO Air/Cable shift
Specification:
Power Take Off PA401
- DEEP REACH
Meshes with many Asian manufactured transmissions - HEAVY DUTY TAPER ROLLER BEARINGS
Long life and increased support for the idler gear - VARIETY OF ENGAGEMENT TYPES
- HELICAL GEARS
Quieter operation - CONSTANT MESH GEARS
Less potential for gearbox damage if operated incorrectly - 401 SERIES
- POWER TAKE-OFF
Suitable for air, vacuum or cable controls
The PA401 Series PTO has been designed to suit Isuzu MYY and MYY AMT transmissions, and is available with air, vacuum or cable operation. This regular duty PTO (336Nm) is ideally suited to applications requiring small flows such as cranes and underbody hoists and is capable of handling all applications that this size vehicle will usually encounter.
Intermittent duty 336Nm
Power take off for Isuzu MYY transmissions
Weight:
0lb
Isuzu MZW - PA418 Series Heavy Duty Deep Reach 8 Bolt 2 Gear Airshift
Specification:
Power Take Off PA418
- 0.91 REDUCTION RATIO
For very high torque at the output shaft - CONSTANT MESH
With heavy duty bearings for longer life - WIDE VARIETY OF OUTPUTS
To suit many vehicle configurations
The PA418 series PTO has been designed to suit the mainshaft PTO opening on the MZW series of transmissions fitted to 'F' series Isuzu trucks with 6 cylinder engines and non 4 x 4 configurations.
Intermittent duty 460Nm
Power take off for Isuzu MZW transmissions
Weight:
0lb
Isuzu MZW - PA419 Series Heavy Duty Deep Reach 8 Bolt 3 Gear Airshift
Specification:
Power Take Off PA419
- 1:1 RATIO with engine
For very high speed at the output shaft - CONSTANT MESH
With heavy duty bearings for longer life - WIDE VARIETY OF OUTPUTS
To suit many vehicle confi gurations
The PA419 Series was designed to suit the mainshaft PTO opening on the Isuzu MZW series of transmissions fitted to 4 x 4 trucks or trucks with 4 cylinder engines. This 3 gear PTO gives an output rotation opposite to engine.
Intermittent duty 460Nm
Power take off for Isuzu MZW transmissions
Weight:
Isuzu MZX6P - PA858 Series Medium Duty Deep Reach 8 Bolt Airshift
Specification:
Power Take Off PA858KP
- 0.94:1 REDUCTION RATIO
To allow maximum torque for pump operation - AIR SHIFT OPERATED
For ease of engagement - A RANGE OF OUTPUTS
To allow close coupling or remote mounting of the pump - TAPERED ROLLER BEARINGS
Higher torque capacity
Developed for the latest Isuzu transmission the PA858KP Series PTO has been developed to provide an excellent output ratio and torque capacity to the maximum available at the PTO opening. Available with airshift operation, this PTO is ideally suited to tippers and tilt tray operation.
Intermittent duty 250Nm
Power take off for Isuzu MZX6P transmissions
Weight:
0lb
Isuzu MZZ - PA857 Series Medium Duty Deep Reach 8 Bolt Air/Cableshift
Specification:
Power Take Off PA857
- 0.8:1 REDUCTION RATIO
To allow maximum torque for pump operation - AIR SHIFT OPERATED
For ease of engagement - A RANGE OF OUTPUTS
To allow close coupling or remote mounting of the pump - TAPERED ROLLER BEARINGS
Higher torque capacity
The PA857 Series PTO is a high capacity unit that is available in both air or cable operation, and can be integrated in the truck control system for AMT (automated manual transmission) versions. This medium duty (320Nm) PTO is suitable for most applications and can be provided with a variety of output types.
Intermittent duty 320Nm
Power take off for Isuzu MZZ transmissions
Weight:
