Skip to main content

Allison Transmissions

You are here

Allison 3000,4000 - PA28 Series Heavy Duty 10 Bolt Constant Drive
Specification:

Power Take Off PA28

  • RATIO OF 0.806, 0.904, 1.15, 1.40 OR 1.64
    (TRANSMISSION DEPENDANT)
  • Giving good output values for all applications
  • CONSTANT DRIVE - Ensuring no gear clash when operating. Suitable for driving variable displacement piston pumps
  • VITON SEALS AND ‘O’ RINGS - Ensuring compatibility with high temperature conditions
  • ONE GASKET FITMENT - Simple to install, resulting in lower installation costs.
  • LOW PROFILE - Providing easier installation on narrow chassis.

The PA28 Series is a constant mesh, constant drive PTO designed to suit the 10 bolt transmission openings on the MD and HD series Allison automatic transmissions. This PTO has a very high torque rating which is well suited to heavy duty applications such as transit mixers. Being driven from the input to the transmission, this PTO provides a live drive output that is available whenever the engine is running, and can be compared to an engine flywheel PTO.

Intermittent duty 650Nm
PTO for Allison 3000, 4000 transmissions

Weight:
0lb
Allison 3000,4000 - PA38 Series Heavy Duty 10 Bolt Hotshift
Specification:

Power Take Off PA38

  • RATIO OF 1.16 OR 1.64 (TRANSMISSION DEPENDANT)
    Giving good output values for all applications.
  • INTERNAL CLUTCH SYSTEM
    Ensuring no gear clash when engaging.
    Ability to engage when moving.
  • VITON SEALS AND ‘O’ RINGS
    Ensuring compatibility with high temperature conditions.
  • ONE GASKET FITMENT
    Simple to install, resulting in lower installation costs.
  • LOW PROFILE
    Providing easier installation on narrow chassis.
  • BALANCED LIFTING
    Easy & effortless installation.

The PA38 Series is a constant mesh, hotshift engagement PTO designed to suit the 10 bolt transmission openings on the MD and HD series Allison automatic transmissions. This PTO has a very high torque rating which is ideally suited to heavy duty applications such as transit mixers and large industrial waste compactors. Uniqually designed internal components enables this PTO have the lowest internal stresses and noise levels of all similar PTOs on the market, while maintaining the highest torque rating available.

Intermittent duty 650Nm
PTO Allison 3000, 4000 transmissions

Weight:
0lb
Allison 3000,4000 - PA40 Series Heavy Duty 10 Bolt Hotshift
Specification:

• RATIO OF 0.80, 1.03 OR 1.24
(TRANSMISSION DEPENDANT)
Giving good output values for all applications
• INTERNAL CLUTCH SYSTEM
Ensuring no gear clash when engaging
Ability to engage when moving
• VITON SEALS AND ‘O’ RINGS
Ensuring compatibility with high temperature conditions
• ONE GASKET FITMENT
Simple to install, resulting in lower installation costs.
• LOW PROFILE
Providing easier installation on narrow chassis.
• BALANCING LIFTING
Easy & effortless installation.

Weight:
0lb
Allison 3000,4000 - PA4100 Series 10 Bolt Hotshift
Specification:

• RATIO OF 0.79 TO 1.74 (TRANSMISSION DEPENDANT)
Giving good output values for all applications
• INTERNAL CLUTCH SYSTEM
Ensuring no gear clash when engagingAbility to engage
when moving
• VITON SEALS AND ‘O’ RINGS
Ensuring compatibility with high temperature conditions
• ‘ONE GASKET, ONE HOSE’ FITMENT
Simple to install, resulting in lower installation costs
• LOW PROFILE
Providing easier installation on narrow chassis

Weight:
0lb
Allison 5000,6000,8000,9000 - PA43 series 8 Bolt PTO
Specification:

• THREE RATIOS FROM 0.87 TO 1.59 (TRANSMISSION DEPENDANT)
Giving good output values for all applications
• INTERNAL CLUTCH SYSTEM
Ensuring no gear clash when engaging
Ability to engage when moving
• VITON SEALS AND ‘O’ RINGS
Ensuring compatibility with high temperature conditions
• ONE GASKET FITMENT
Simple to install, resulting in lower installation costs.
• LOW PROFILE
Providing easier installation on narrow chassis.
• BALANCING LIFTING
Easy & effortless installation.

Suits: Allison 5000/6000 and 8000/9000

The 43 series is a constant mesh Hotshift PTO designed to suit the 8 bolt transmission openings on the 5000/6000 and 8000/9000 series Allison automatic transmissions. This PTO has a high torque rating which is well suited to heavy duty applications.

Weight:
0lb
Allison 3500ORS,3500SP,HD4430ORS - PA44 Series 10 Bolt Constant Drive
Specification:

Allison MD 3500ORS, 3500SP, HD 4430ORS

• RATIO OF 0.666, 0.806, 1.01, 1.15 OR 1.38
(TRANSMISSION DEPENDANT)
Giving good output values for all applications
• CONSTANT DRIVE
Ensuring no gear clash when operating
Suitable for driving variable displacement piston pumps
• VITON SEALS AND ‘O’ RINGS
Ensuring compatibility with high temperature conditions
• ONE GASKET FITMENT
Simple to install, resulting in lower installation costs

Weight:
0lb
Allison 1000,2000 - PA45 Series 6 Bolt Hotshift
Specification:

Power Take-off PA45

  • Available in wide variety of outputs for optimum configuration.
  • SAE 6 BOLT OPENING
    Industry standard
  • INTERNAL CLUTCH SYSTEM
    Requires no operator effort to engage
  • IDEAL FOR HIGH FREQUENCY
    ENGAGEMENT APPLICATIONS

LOW RATIO HEAVY DUTY SIDE MOUNTED HOTSHIFT POWER TAKE-OFF
The 45 series is a constant mest PTO designed to suit 6 bolt SAE transmission openings on certain Allison automatic transmissions.
This PTO has a very high torque rating which is well suited to heavy duty applications.
SUITS:
Allison 1000, 2000 and 2500 series transmissions

Weight:
0lb
Allison 3000,4000 - PA4800 Series Heavy Duty 10 Bolt Hotshift
Specification:

The 48 series is a constant mesh hotshift PTO designed to suit the 10 bolt transmission openings on the MD and HD series Allison automatic transmissions.

This PTO has a high torque rating which is well suited to heavy duty applications.

Weight: